You are here:

Home
Hydromaz Water Treatment

Award-winning technology

Hydromaz Water Treatment

Gold Award Winner of International Inventor – applying pure physics technology to recondition water quality. It uses water to treat the water system, with no chemicals added.

5 - 50%

cooling effect improvement

Up to 50%

heat exchanger efficiency

Chemical-Free

treatment method

advantages

Six ways Hydromaz pays for itself

Improve cooling effect

From 5% up to 50% improvement, depending on existing scale condition.

Improve heat exchanger efficiency

Efficiency gains up to 50% once scale and rust are removed from the system.

Extended equipment lifespan

Longer service life for pipes and equipment protected from corrosion and scale.

Cost saving on chemicals

No ongoing chemical dosing required — Hydromaz uses physics not additives.

Reduced flushing & downtime

Cost savings on annual flushing and the process downtime it requires.

Environmentally friendly

Water discharged from the system carries no added chemical load.

how it works

Low-voltage, high-frequency water reconditioning

The system generates a low-voltage, high-frequency wave that removes the electric bond in macro
water molecules, separating active oxygen ions from hydrogen ions. The result is micro-molecule
water with strong penetration, dissolving and cleaning characteristics.

01 Macro-molecule water is converted to micro-molecule water
02 Micro-molecule water dissolves accumulated scale, slime and rust in pipelines
03 Dissolved contaminants are attracted to and captured on the electrode

comparison

Hydromaz vs. conventional chemical treatment

Hydromaz	Chemical Treatment
Only technology to reduce total hardness (TDS) in water	Cannot reduce TDS in water — must flush and change water if TDS exceeds limit
Permanent solution — no rust, no scales after installation	Pipeline accumulates scale again soon after chemical dosing; requires regular monitoring
Prevents corrosion by removing rust and scale	Chemical is corrosive — causes metal pipeline corrosion and shortens equipment lifespan
Doesn't require frequent water changes	Water change required often (every 1–2 weeks for high-usage systems) once TDS is high
Eliminates bacteria and prevents algae growth	Cannot stop algae effectively — system needs frequent cleaning
Contributes 5–10%+ electricity savings	Cannot control water quality; added capacity needed when heat exchanger effectiveness drops
Reduces downtime via consistent pressure and temperature	Old equipment often trips despite regular chemical dosing
Environmentally friendly discharge	Water contains high chemical levels — affects environment when discharged to drain

model selection

Six models, sized to your system

Model No.	Size / mm	Weight	Electrode	Suitable Capacity (HRT)	Refrigeration Tons
SS 10	200×450×500	25 KG	1 × D1	< 50 HRT	—
SS 20-1	665×460×380	50 KG	1 × D2	< 150 HRT	—
SS 20-2	965×460×380	75 KG	2 × D2	< 300 HRT	—
SS 50-3	1315×530×450	105 KG	3 × D2	< 450 HRT	—
SS 150-4	1680×530×450	175 KG	4 × D2	< 600 HRT	—
OTHER	Multiple of any model above	—	—	As per customer	—

Need a spec sheet or a custom quote?

Tell us your requirements — our engineering team replies within one business day.